3MF Cost Calculator
Last updated
Drop a 3MF from Bambu Studio or OrcaSlicer. A sliced file is priced from the slicer's own time and weight, an unsliced one from its own settings, plate by plate. Your browser reads it here and never uploads it.
Your print
Material$20/kg
ColorsNo surcharge
Sets wear & power
Drop an STL, OBJ or 3MF
Auto-fills time & weight
User Setting
- PLA
- $20/kg
- Electricity
- $0.17/kWh
- Machine wear
- $0.25/h
- Labor
- $2
- Markup
- 50%
- Failure buffer
- 10%
Example quote
for 3.5 h, 45 g · type yours$6.50
3h 30m · 45 g · PLA · 1 color
A customer price: your cost plus labor, a failure buffer and markup.
Filament (PLA) $0.90
Electricity $0.07
Machine wear $0.88
Labor $2.00
Failure buffer (10%) $0.39
Markup (50%) $2.12
Total$6.50
Rounded up to a clean price from $6.36. Untick a line to leave it out of this estimate.
What it reads from a sliced 3MF
- The slicer's own print time and filament weight for each plate: all of them summed, or one plate on its own from the Plate list under the file.
- The most filaments any one plate swaps between, which sets the colors and so the multi-color surcharge (four or more count as 4+).
- The filament type carrying the most grams, which sets the material by family: PLA-CF is priced as PLA.
- A file saved with Export plate sliced file (a .gcode.3mf) is a sliced 3MF and reads as one.
What it reads from an unsliced 3MF
- The project's own infill, wall loops and layer height, which the time and weight are estimated at instead of the stock 0.20 mm profile's.
- Supports, when the project turns automatic supports on: added from the area that faces down off the bed.
- Each plate as a print of its own, with its own setup and layers. Parts parked off every plate are left out, as the slicer leaves them.
- The printer you pick on the job ticket, which times the estimate from that printer's own stock profile: a P1S prints the same part about 28% faster than an A1.
What it does not read
- A setting changed for one object only, such as more infill in one part.
- Supports painted on by hand, and vase mode.
- Anything your slicer has not worked out yet. For the exact figure, slice the project and drop the sliced file, or type the time and weight your slicer shows.
How the estimates are fitted to the slicer is on the About page, and what real prints cost is on the cost page.